Home of the Touchless 2-Wire Switch Family

Germ Free, 2-Wire, Touchless, Simple Switch Replacements that are Sanitary and Need No Special Wiring

Scroll through the touchless switch examples to see the many in home working installations.

For additional information click on the location title in the listing below.

Three Touchless Light Switches for the kitchen, mounted together

These three switches (3 x model TIMER5030) control two kitchen lights and the low voltage LED lights over the counter. All three of the yellow LEDs are on indicating that all three switches are operational and none of the lights are turned on. The timers in these switches have been disabled. These switches required no special wiring when they were installed.

Bathroom sink reflection in chrome faceplate for 2 Touchless Light Switches

Two Touchless Light Switches (2 x model TIMER5030) are in this bathroom. One has turned the light on but the other, the bathroom fan, is off. You can tell because its yellow LED is on. The TIMER5030 for the bathroom light has been disabled. The timer for the bathroom fan has been to set to 30 minutes.

A reflection of the sink can be seen in the chrome switch plate. These switches required no special wiring when they were installed.

Two working Touchless Light Switches by the ground fault outlet in the bathroom

Here are two black TIMER5030 Touchless Light Switches with a dual white switch faceplate. One controls the low voltage LED lights for the shower while the other controls the bathroom fan. Both timers are set to automatically shut off after thirty minutes. The yellow LEDs in the center of each switch are on indicating the LED lights and bathroom fan are both off. These switches required no special wiring when they were installed.

Working Touchless Light Switch example near a picture

This Touchless Light Switch is cream (sometimes referred to as neutral) in colour with a white coloured face plate and a radiating yellow LED in the center to indicate the switch is operating but the light itself is off. This switch required no special wiring when it was installed.

Working Touchless Light Switch by the paperback bookshelf

This Touchless Light Switch is next to the bookshelf by the door in bedroom 2. It is black in colour with a cream coloured face plate and a radiating yellow led to indicate the switch is operating but the light itself is off. This switch required no special wiring when it was installed.

Example of Touchless Light Switches by the dining room

Two multiway (model MULTI-224 x 2) are next to the dining room. One controls the chandelier and the one on the left works with another MULTI-224 located at the foot of the basement stairs to control the basement stair lights. (That way =====>) The yellow LEDs indicate the switches are working but the lights they control are extinguished. These switches required no special wiring when they were installed and the MULTI-224 didn’t need a traveler wire (Return Neutral or Third Wire).

Two Touchless Light Switches at the bottom of the basement stairs

These two Multiway (Model MULTI-224) white Touchless Light Switches are at the foot of the basement stairs. The one on the right works in concert with a second MULTI-224 at the top of the stairs. (<— That Picture)  The left switch controls two 4 foot florescent tubes and an LED bulb for the basement. The Yellow LEDs on both switches are extinguished indicating that the lights they control are on. These switches required no special wiring when they were installed.

This Example has three Touchless Light Switches working by the front door

All three of these switches are neutral coloured (cream) multiway models (MULTI-224). The right switch controls the porch light. The middle switch controls the light directly above while the left switch controls an outlet with an LED lamp connected to it. These switches required no special wiring when they were installed.

Example of a Touchless Light Switch by the garage door

A swerve towards this Touchless Light Switch, (a solitary multiway, “MULTI-224”) while coming in or going out will allow your arm to turn the garage light on or off without any additional action. This switch required no special wiring when it was installed.

A solitary Touchless Light Switch for the veranda light

This is a Neutral coloured (Cream) model MULTI-224 Touchless Light Switch with a cream coloured faceplate that controls the veranda light. The light is presently off which is why the yellow LED is on. This switch required no special wiring when it was installed.

Longest working Touchless Light Switch in the Laundry Room

This is one of the first Touchless Switches manufactured. It is a black TIMER5030 model with its timer disabled. It controls two, four foot florescent tubes and a Compact Florescent Bulb (CFL). This switch has been in continuous service since 2015. This switch required no special wiring when it was installed.